With
over 70 years of experience in the manufacturing of high –end
tables, mixed with the advice of top players worldwide, our philosophy
is very clear:
“To build the finest tables possible, using the best components
available”
You
can easily navigate this page with the following links:
 |
Finish
Each table has a six-step finish; one coat of penetrating stain,
three coats of sealer and two finishing coats of polyurethane
lacquer. Gabriels tables are finished in full compliance with
all CE air quality standards. |
Rails
Rails for all models are available in an engineered wood/plastic
composite: Dianite. The material is made of laminated wood,
compressed with phenolic resin, the same resin that is used
to produce the famous Aramith balls. Exceptional hardness
and resilience makes it extremely resistant to unusual wear,
abrasion and moisture. A perfect solution for commercial environments.
|
 |
Gabriels
has always taken special pride in its fine craftsmanship.
The rails are a good example, finished to sheer perfection. |
 |
Slates
Slate is the foundation of every table; the table is designed
and built around it. Because they are so important to the final
product, Gabriels uses only selected slates. All our slates
are processed with “FST” (flat surface technology).
This exclusive technology developed by Gabriels uses the most
modern measurement systems to insure that slates have the flatness
required at delivery and will remain stable for years to come. |
Heating
system
All carom tables are equipped with an electronically controlled
heating system. This system is fully programmable and available
for 110, 125 or 220 volts systems.
|
 |
 |
Cushions
Gabriels uses Artemis cushions (K66 profile) on their pool tables
and Kleber or Artemis (P37 profile) on their carom tables. The
positioning of the cushions is essential for the ultimate performance
of the table. Every cushion is measured and re-checked by at
least two technicians to avoid any mistakes possible. |
Brass
levelers and I-beams
Solid brass levelers are not only beautiful, but make for
easy leveling of the table and are resistant to corrosion.
Gabriels uses massive 10cm x 10cm steel I-beams to make the
frame for the Imperator and Imperator Classic carom tables.
This insures stability for the 60mm slates. |
 |
 |
Hardware
Gabriels uses machined hardware; these retain their rigidity
after repeated reassembly. |
Pocket
liners
Gabriels pocket liners are flush with the rails, making shooting
over a pocket as easy as shooting off the rail. The high quality
liner material will not mark the balls or cues. We guarantee
the pockets for tree years in commercial use. Size, corner
cut and drop point meet or exceed all BCA specifications. |
 |
 |
Cloth
Gabriels uses Simonis cloth, as they are the ultimate and most
experienced manufacturers in their field. Simonis makes the
highest quality cloth in the world. |
U-beams
Gabriels uses massive 10cm x 5cm steel U-beams to make the
frame for the Signature Pro pool tables. This insures stability
for the
30 mm slates. |
 |
 |
Reliability
Gabriels is the first table manufacturer to install high-speed
routers.
We use CAD-CAM systems in order to provide parts that are exactly
the same time after time. |
Pockets
Newly designed marine grade vinyl pockets that have been eveloped
for easy installation and durability. |
 |
|
 |
